Material: Tecapeek™ CF30 (30% Carbon fiber filled)
Polyetheretherketone
Tecapeek™ is a unique, semi-crystalline, high temperature engineering thermoplastic. It is an excellent material for a wide spectrum of applications where
thermal, chemical, and combustion properties are critical to performance. Especially significant in this regard is Tecapeek™'s ability to retain its flexural and
tensile properties at very high temperatures in excess of 482°F. This material has been used in applications such as automotive, marine, nuclear, oil well,
electronics, medical and aerospace. Tecapeek™ offers exceptional chemical resistance and outstanding wear and abrasion resistance. The addition of glass
fiber reinforcemtnes inhances the mecahnical and thermal properties of the basic Tecapeek™. The addition of carbon fiber reinforcements enhances the
mecahnical and thermal properties of the basic Tecapeek™.
| Mechanical Properties |
Test Method ASTM |
Value |
Units |
|
|
|
|
| Density |
D792 |
0.052 |
lbs/in3
|
| Specific Gravity |
D792 |
1.41 |
g/cc |
| Water Absorption @ 24 hours, 73°F |
D570 |
0.06 |
% |
| Water Absorption @ Saturation, 73°F |
D570 |
|
% |
| Tensile Strength, 73°F |
D638 |
27,000 |
psi |
| Tensile Modulus |
D639 |
1,885,400 |
psi |
| Elongation ( at break), 73°F |
D638 |
1.1 |
% |
| Flexural Strength, 73°F |
D790 |
46,100 |
psi |
| Flexural Modulus, 73°F |
D790 |
1,850,000 |
psi |
Compressive Strength 73°F |
D695 |
34,800 |
psi
|
| Shear Strength, Ultimate, 73°F |
D3846 |
14,100 |
psi
|
| Izod Impact Strength, 73°F |
D256 |
1 |
ft-lb/in of notch
|
| Rockwell Hardness, 73°F |
D785 |
M - 107 |
M or R Scale |
| Limiting PV @ 68°F 1200 in/min |
|
385,000 |
(psi) (ft/min) |
| Coefficient of Friction, @ 68°F 1200 in/mm, 155 lbs load |
|
0.22 |
in.3-min/ft.lbs.hr |
|
|
|
|
| Thermal Properties |
|
|
|
|
|
|
|
|
|
| Heat Deflection Temperature @ 264 psi, 1/4" |
D648 |
600 |
°F |
| Maximum Continuous Use Temperature |
|
482 |
°F |
| Melting Point |
|
633 |
°F |
| Coefficient of Linear Thermal Expansion |
D696
|
0.8 X 10-5 |
in/in./°F |
| Thermal Conductivity |
C177 |
6.37 |
|
| Flammability |
UL94
|
V - 0 |
(mm) |
|
|
|
|
| Electrical Properties |
|
|
|
|
|
|
|
|
|
| Volume Resistivity |
D149 |
|
ohm - cm |
| Surface Resistivity |
D257 |
|
ohm/square |
| Dielectric Strength |
D257 |
|
Volts/mil |
| |
|
|
|
| *The values shown in these and the following charts are typical,
average properties. Actual values may differ due to variations
in resin formulations and processing methods. These values are
obtained from sources believed to be reliable, including the
resin manufactures, converters and other published sources.
However, they should not be used for specification or design
purposes. |
